Repairs To Upvc Windows Isn't As Tough As You Think
Repairs To Upvc Windows Isn't As Tough As You Think
Blog Article
Repairs to uPVC Windows
uPVC windows are a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not rot or rust like aluminum or timber.
Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce repair costs as well as increase energy efficiency.
1. Broken Glass
The broken glass in your windows could cause serious damage to your home, and could even be fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.
Single-pane windows are relatively easy to replace, and they will usually fit into the frames that were previously in use very easily. However when you have double-pane windows that are held in place by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this instance you'll need to find some plastic spacers to help the new pane to fit properly into the frame of the window.
If you plan to try to remove the window panes yourself it is important to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass, so that any shards will fall onto the cloth rather than on the floor where they could be trampled on and cause further damage.
Once the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and fix the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap between the window and the door is substantial, you may need to consider an alarm system that has windows. This will give you the best of both.
2. Sagging
Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. However, with time, they are susceptible to a range of problems including sagging. A sagging window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from worsening.
To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can get to the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after you've repositioned your hinges. If you are happy with the fit of the window, you can tighten screws to hold them in the right position.
If you cannot reposition the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. It is crucial to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.
uPVC handles may also loosen. This is often caused by screws that have loosened over time, but it can be caused by the handle mechanism wears out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close your window and do a test to ensure that it fits. The corners of the sash should be aligned with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into the position it was in.
3. Water Leaks
If you awake to wet floors and damp walls each time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature of your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or is missing.
This is an easy fix that can be done by any DIYer who has the ability. Based on the severity of the issue the caulking that was used up may need to be removed before a new layer is applied. When it is time to uPVC repair, you should avoid over-caulking. This will only make your window harder to clean and reduce its energy efficiency.
It is essential to ensure that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious cases you might have to consider replacing the window.
Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread throughout the house.
It is also important to note that if the leakage is coming from between the glass in your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. Again this can easily be corrected by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or slack and blow open in a breeze It could be hinges that are at the fault. Any competent DIYer can replace these in a matter of minutes.
Nearly every home in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. It is very easy to change the hinges on a window but it's much simpler if you have someone to help hold the frame.
It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should be opened.
Faulty window hinges could be the result of incorrectly opening the window in a certain way or due to improper installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are happy to provide assistance.
Regular lubrication of hinges is also essential. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. It is recommended to do this once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.
5. Draughts
Draughts in Upvc windows website can be caused by a few different things. The hinges can also be unbalanced due to wear, which can cause an opening where the sash meets frame. If they're beyond repair, it could be necessary to get them re-aligned. Second, the interlock can also become misaligned. This happens on the hinge side and might require to be cleaned. In some cases it might be necessary to replace them.
The next common reason for draughts is window seals. These can become worn down or damaged over time, and allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to prevent draughts. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and decrease the possibility of draughts.
One of the most effective ways to reduce the draughts in your home is to use a draught excluder. These are usually fabric tubes that are filled with some type of filler. They can be placed on the top of your windowsill. They can keep your home warm by blocking cold air.
With a little regular maintenance and repairs windows made of upvc will provide excellent security and insulation for your home. It is essential to remember that all windows eventually wear out and it is more cost-effective to simply replace them rather than repair them. So, if you are experiencing issues with your Upvc windows, it is recommended to seek help from a professional as soon as you can.